Errata - English

In USP Reference Standards 〈11〉/USP Cefdinir Related Compound A RS: Change
413.43
to:
413.42
AND
In USP Reference Standards 〈11〉/USP Cefdinir Related Compound B RS: Change
C₁₄H₁₃N₄O₄S₂ 365.41
to:
C₁₄H₁₄N₄O₄S₂ 366.41

In USP Reference Standards 〈11〉/USP Cefdinir Related Compound A RS: Change
413.43
to:
413.42
AND
In USP Reference Standards 〈11〉/USP Cefdinir Related Compound B RS: Change
C₁₄H₁₃N₄O₄S₂ 365.41
to:
C₁₄H₁₄N₄O₄S₂ 366.41

In USP Reference Standards 〈11〉/USP Azaerythromycin A RS: Change
734.96
to:
734.97
AND
In USP Azithromycin N-oxide RS: Change
764.98
to:
765.00
AND
In USP N-Demethylazithromycin RS: Change
734.96
to:
734.97
AND
In USP Desosaminylazithromycin RS: Change
590.79
to:
590.80

In USP Reference Standards 〈11〉/USP Iodixanol Related Compound E RS: Change
5-[[3-[[3-[[(2,3-Dihydroxypropyl)amino]carbonyl]-5- [[amino]carbonyl]-2,4,6-triiodophenyl](acetylimino)]-2-hydroxypropyl]-(acetylimino)]-N,N′-bis(2,3-dihydroxypropyl)-2,4,6-triiodo-1,3-benzenedicarboxamide.
to:
5-{N-[3-(N-{3-Carbamoyl-5-[(2,3-dihydroxypropyl)carbamoyl]-2,4,6-triiodophenyl}acetamido)-2-hydroxypropyl]acetamido}-N¹,N³-bis(2,3-dihydroxypropyl)-2,4,6-triiodoisophthalamide.

In USP Reference Standards 〈11〉: Change
USP Rivastigmine Tartrate R-Isomer RS
to:
USP Rivastigmine Tartrate R-Isomer RS
(R)-3-[1-(Dimethylamino)ethyl]phenyl ethylmethylcarbamate, hydrogen tartrate.
C₁₄H₂₂N₂O₂ · C₄H₆O₆ 400.42

In USP Melengestrol Acetate Related Compound A RS: Change
16-Methylene-17α-hydroxy-4-pregnene-3,20-dione 17-acetate.
to:
16-Methylene-3,20-dioxopregn-4-en-17-yl acetate.
AND
In USP Melengestrol Acetate Related Compound B RS: Change
17α-Hydroxy-6,16-dimethyleneprogna-4-ene-3,20-dione 17-acetate.
to:
6,16-Dimethylene-3,20-dioxopregn-4-en-17-yl acetate.

Change
Prepare this solution by one of the following procedures:
to:
Prepare this solution by one of the following procedures. Apply the Test for sensitivity to confirm suitability for freshly or previously prepared solutions or commercially bought solutions.
AND
In Storage: Delete
Use the Test for sensitivity to confirm suitability for use.
AND
In Procedure with No Preservative: Delete
Apply the Test for sensitivity to confirm suitability for freshly or previously prepared solutions.
AND
In Test for sensitivity: Delete
Use the Test for sensitivity to confirm suitability for use.
AND
In Procedure with Salicylic Acid as Preservative: Change
Mix 1 g of soluble starch with 50 mL of cold water
to:
Mix 1 g of soluble starch with 5 mL of cold water

In Acceptance criteria/Total impurities: Change
NMT 2.5%. Disregard any peak below 0.05% of the peak area of fluocinolone acetonide from the Standard solution.
to:
NMT 2.5%. Disregard any peak below 0.05% of the peak area of fluocinolone acetonide from the Sample solution.

Change
Proceed as directed in Identification test A under Metaproterenol Sulfate Inhalation Solution, beginning with “Allow the spots to dry”:
to:
Allow the spots to dry, and develop the chromatogram in a solvent system consisting of the upper layer of a freshly prepared mixture of butyl alcohol, water, and formic acid (50:25:7) until the solvent front has moved about three-fourths of the length of the plate. Remove the plate from the developing chamber, mark the solvent front, and allow the solvent to evaporate. Locate the spots on the plate by examination under short-wavelength UV light:

Change
Proceed as directed in Identification test A under Metaproterenol Sulfate Inhalation Solution, beginning with “Allow the spots to dry”:
to:
Allow the spots to dry, and develop the chromatogram in a solvent system consisting of the upper layer of a freshly prepared mixture of butyl alcohol, water, and formic acid (50:25:7) until the solvent front has moved about three-fourths of the length of the plate. Remove the plate from the developing chamber, mark the solvent front, and allow the solvent to evaporate. Locate the spots on the plate by examination under short-wavelength UV light:

Change
Proceed as directed in the Identification test under Erythromycin Ethylsuccinate Oral Suspension, beginning with “Prepare a Standard solution.”
to:
Prepare a Standard solution of USP Erythromycin Ethylsuccinate RS in methanol containing about 3 mg per mL. Apply separately 10 µL each of the test solution and the Standard solution to a suitable thin-layer chromatographic plate (see Chromatography 〈621〉) coated with a 0.25-mm layer of chromatographic silica gel mixture, and allow to dry. Place the plate in an unlined chromatographic chamber, and develop the chromatograms in a solvent system consisting of a mixture of methanol and chloroform (85:15) until the solvent front has moved about 9 cm. Remove the plate from the chamber, mark the solvent front, and allow the solvent to evaporate. Spray the plate with a mixture of dehydrated alcohol, p-methoxybenzaldehyde, and sulfuric acid (90:5:5). Heat the plate at 100° for 10 minutes, and examine the chromatograms, in which the erythromycin and succinic acid moieties appear as black-to-purple spots: the R_F values of the principal spots obtained from the test solution correspond to those obtained from the Standard solution.

In Chromatographic system and Procedure: Change
C is the concentration, in mg per mL, of USP Dextromethorphan Hydrobromide RS, on the anhydrous basis, in the Standard preparation;
to:
C is the concentration, in mg per mL, of USP Dextromethorphan Hydrobromide RS in the Standard preparation;

Change
Constitute Erythromycin Ethylsuccinate for Oral Suspension as directed in the labeling, and proceed as directed in the Assay under Erythromycin Ethylsuccinate Oral Suspension.
to:
Constitute Erythromycin Ethylsuccinate for Oral Suspension as directed in the labeling, and proceed as directed for erythromycin under Antibiotics—Microbial Assays 〈81〉, using an accurately measured volume of the reconstituted suspension, freshly mixed and free from air bubbles, blended for 4 ± 1 minutes in a high-speed glass blender jar with sufficient methanol to give a stock solution containing the equivalent of about 1 mg of erythromycin per mL. Dilute this stock solution quantitatively with Buffer B.3 to obtain a Test Dilution having a concentration assumed to be equal to the median dose level of the Standard.

Change
Proceed with Injection as directed in the Assay for lidocaine hydrochloride under Lidocaine and Epinephrine Injection.
to:
Proceed with Injection as directed in the Assay for lidocaine hydrochloride under Lidocaine Hydrochloride and Epinephrine Injection.