Errata - English

In Test 1: Change
Buffer stage
Medium: 0.05 M pH 6.8 phosphate buffer (see Reagents, Indicators, and Solutions—Buffer Solutions)
to:
Buffer stage
Medium: 0.05 M pH 6.8 phosphate buffer (see Reagents, Indicators, and Solutions—Buffer Solutions); 900 mL

In Test 1, Test 3, Test 4, Test 5, and Test 6/Analysis: Change
M_r1 = molecular weight of atorvastatin, 558.64
M_r2 = molecular weight of atorvastatin calcium, 1155.34
to:
M_r1 = molecular weight of atorvastatin, 558.65
M_r2 = molecular weight of atorvastatin calcium, 1155.36

In General Pharmacopeial Requirements/Pesticide Residues: Change
where L is the limit in the original article as listed in Table 4 (see Pesticide Residue Analysis under Articles of Botanical Origin <561>)
to:
where L is the limit in the original article as listed in Table 5 (see Pesticide Residue Analysis under Articles of Botanical Origin <561>)

In footnote 1 in Molecular Weight Measurements of Low Molecular Weight Heparins by Gel Permeation Chromatography/Chromatographic system/Columns/Analytical: Change
guard column TSK SWXL 6-mm × 4-mm;
to:
guard column TSK SWXL 6-mm × 4-cm;

In Analysis: Change
Add to the acid solution 5.0 mL of Standard dithizone solution and 4 mL of Ammonia cyanide solution,
to:
Add to the acid solution 5.0 mL of Standard dithizone solution and 4 mL of Ammonium cyanide solution,

In Acetic Acid in Peptides/Analysis: Change
C_SPA = concentration of potassium acetate in each of the Standard solutions (mg/mL)
to:
C_SPA = concentration of potassium acetate in each of the Standard solutions (µg/mL)
AND
In Ammonium/Analysis: Change
C_SAC = concentration of ammonium chloride in each of the Standard solutions (mg/mL)
to:
C_SAC = concentration of ammonium chloride in each of the Standard solutions (µg/mL)

In Sterility Tests 〈71〉: Change
Where the label states that Piperacillin is sterile or that it must be subjected to further processing during the preparation of injectable dosage forms, it meets the requirements when tested as directed in Test for Sterility of the Product to Be Examined, Membrane Filtration.
to:
Where the label states that Piperacillin is sterile, it meets the requirements when tested as directed in Test for Sterility of the Product to Be Examined, Membrane Filtration.

In Alcohol-Insoluble Matter/Sample solution: Change
100 mg/mL of Urea dissolved in warm alcohol
to:
Dissolve 5.0 g of Urea in 50 mL of warm alcohol.
AND
In Alcohol-Insoluble Matter/Analysis: Change
If any insoluble residue remains, pass the Sample solution through a tared filter, wash the residue and the filter with 20 mL of warm alcohol per 50 mL of Sample solution, and dry at 105° for 1 h.
to:
If any insoluble residue remains, pass the Sample solution through a tared filter, wash the residue and the filter with 20 mL of warm alcohol, and dry at 105° for 1 h.

In Release Liner Peel Test: Change
The product fails the test if the mean peel force is outside the acceptable range determined during product development.
to:
The product fails the test if the overall mean peel force is outside the acceptable range determined during product development.

Change
Where the label states tetracycline hydrochloride must be subjected to further processing during the preparation of injectable dosage forms, the level of bacterial endotoxins are such that the requirement under the relevant dosage form monograph(s) in which tetracycline hydrochloride is used can be met.
to:
Where the label states Tetracycline Hydrochloride must be subjected to further processing during the preparation of injectable dosage forms, the level of bacterial endotoxins are such that the requirement under the relevant dosage form monograph(s) in which Tetracycline Hydrochloride is used can be met.

In Standardization with visual end point: Change
M = mL edetate disodium × edetate disodium/mL ZnSO₄
to:
M = mL edetate disodium × M edetate disodium/mL ZnSO₄
AND
In Standardization with potentiometric end point: Change
M = mL edetate disodium × edetate disodium/mL ZnSO₄
to:
M = mL edetate disodium × M edetate disodium/mL ZnSO₄

In Vitamin A, Method 3/Analysis: Change
C_S = concentration of retinyl acetate (C₂₃H₃₂O₂) from USP Vitamin A RS in the Standard solution (μg/mL)
to:
C_S = concentration of retinyl acetate (C₂₂H₃₂O₂) from USP Vitamin A RS in the Standard solution (μg/mL)

In Vitamin A, Method 3/Analysis: Change
C_S = concentration of retinyl acetate (C₂₃H₃₂O₂) from USP Vitamin A RS in the Standard solution (μg/mL)
to:
C_S = concentration of retinyl acetate (C₂₂H₃₂O₂) from USP Vitamin A RS in the Standard solution (μg/mL)