Errata - English

In Light-resistant container: Change
〈661.2〉, Functionality, Spectral Transmission Requirements for Light-Resistant Components and Systems.
to:
〈661.2〉, Functionality Test Method, Spectral Transmission Requirements for Light-Resistant Components and Systems.

In Liquid Chromatography: Isocratic Elution/Injection volume: Change
Result = (V_inj2 = V_inj1 (L₂ d_c2² )/(L₁ d_c1²)
to:
V_inj2 = V_inj1 (L₂ d_c2² )/(L₁ d_c1²)
AND
In Liquid Chromatography: Gradient Elution/Column parameters and flow rate: Change
F₂ = F₂ × [(dc₂² × dp₁)/(dc₁² × dp₂)]
to:
F₂ = F₁ × [(dc₂² × dp₁)/(dc₁² × dp₂)]

In Acceptance criteria/Total impurities: Change
NMT 2.5%. Disregard any peak below 0.05% of the peak area of fluocinolone acetonide from the Standard solution.
to:
NMT 2.5%. Disregard any peak below 0.05% of the peak area of fluocinolone acetonide from the Sample solution.

In Analysis: Change
C_U = nominal concentration of dimenhydrinate in the Sample solution (mg/mL)
to:
C_U = determined concentration of dimenhydrinate in the Sample solution, as obtained in the Assay (mg/mL)

Change
847.00
to:
847.02
AND
Change
(9S,12E,14S,15R,16S,17R,18R,19R,20S,21S,22E,24Z)-6,16,18,20-Tetrahydroxy-1′-isobutyl-14-methoxy-7,9,15,17,19,21,25-heptamethylspiro[9,4-(epoxypentadeca[1,11,13]trienimino)-2H-furo[2′,3′:7,8]naphth[1,2-d]imidazole-2,4′-piperidine]-5,10,26-(3H,9H)-trione-16-acetate
to:
(9S,12E,14S,15R,16S,17R,18R,19R,20S,21S,22E,24Z)-6,18,20-Trihydroxy-1’-isobutyl-14-methoxy-7,9,15,17,19,21,25-heptamethyl-5,10,26-trioxo-3,5,9,10-tetrahydrospiro[9,4-(epoxypentadeca[1,11,13]trienimino)-2H-furo[2’,3’:7,8]naphtho[1,2-d]imidazole-2,4’-piperidin]-16-yl acetate

In General Pharmacopeial Requirements/Pesticide Residues: Change
where L is the limit in the original article as listed in Table 4 (see Pesticide Residue Analysis under Articles of Botanical Origin <561>)
to:
where L is the limit in the original article as listed in Table 5 (see Pesticide Residue Analysis under Articles of Botanical Origin <561>)

In Analysis: Change
Calculate the percentage of Nandrolone Decanoate (C₂₈H₄₄O₃) in the portion of Nandrolone Decanoate taken:
to:
Calculate the percentage of nandrolone decanoate (C₂₈H₄₄O₃) in the portion of Nandrolone Decanoate taken:

In Table 2, footnote b: Change
(4S,4aR,5S,5aR,6R,12aS)-2-Acetyl-4-(dimethylamino)-4a,5a,6,12a-tetrahydro-3,5,10,12,12a-pentahydroxy-6-methyl-tetracene-1,11-dioxo-2-naphthacenecarboxamide.
to:
(4S,4aR,5S,5aR,6R,12aS)-2-Acetyl-4-(dimethylamino)-3,5,10,12,12a-pentahydroxy-6-methyl-4a,5a,6,12a-tetrahydrotetracene-1,11(4H,5H)-dione.

In Analysis: Change
Result = (R_U/R_S) x C_S x V x (D/W_U) x (1/L) x 100
R_U = peak area ratio of ibuprofen to benzophenone from the Sample solution
R_S = peak area ratio of ibuprofen to benzophenone from the Standard solution
C_S = concentration of USP Ibuprofen RS in the Standard solution (mg/mL)
V = volume of Medium, 900 mL
D = density of Oral Suspension (g/mL)
W_U = weight of the portion of Oral Suspension added to the Medium (g)
L = label claim (mg/mL)
to:
Result = (R_U/R_S) x C_S x V x (d/W_U) x D x (1/L) x 100
R_U = peak area ratio of ibuprofen to benzophenone from the Sample solution
R_S = peak area ratio of ibuprofen to benzophenone from the Standard solution
C_S = concentration of USP Ibuprofen RS in the Standard solution (mg/mL)
V = volume of Medium, 900 mL
d = density of Oral Suspension (g/mL)
W_U = weight of the portion of Oral Suspension added to the Medium (g)
D = dilution factor of the Sample solution, 2
L = label claim (mg/mL)

Change
2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimeth oxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester
to:
2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester

Change
C₄₈H₇₄O₁₄(Component H₂B_1a) 875.09
C₄₇H₇₂O₁₄(Component H₂B_1b) 861.07
Component H₂B_1a:
Avermectin A_1a, 5-O-demethyl-22,23-dihydro-.
(2aE,4E,8E)-(5′S,6S,6′R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-6′-(S)-sec-Butyl-3′,4′,5′,6,6′,7,10,11,14,15,17a,20,20a,20b-tetradecahydro-20,20b-dihydroxy[11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2′-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70161-11-4.
Component H₂B_1b:
Avermectin A_1a, 5-O-demethyl-25-de(1-methylpropyl)-22,23-dihydro-25-(1-methylethyl)-.
(2aE,4E,8E)-(5′S,6S,6′R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-3′,4′,5′,6,6′,7,10,11,-oxospiro[11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2′[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70209-81-3; UNII: 0W28CYI3TU.
to:
C₄₈H₇₄O₁₄(Component H₂B_1a) 875.11
C₄₇H₇₂O₁₄(Component H₂B_1b) 861.08
Component H₂B_1a:
Avermectin A_1a, 5-O-demethyl-22,23-dihydro-.
(2aE,4E,8E)-(5’S,6S,6’R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-6’-(S)-sec-Butyl-3’,4’,5’,6,6’,7,10,11,14,15,17a,20,20a,20b-tetradecahydro-20,20b-dihydroxy-5’,6,8,19-tetramethyl-17-oxospiro [11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2’-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 71827-03-7; UNII: 91Y2202OUW.
Component H₂B_1b:
Avermectin A_1a, 5-O-demethyl-25-de(1-methylpropyl)-22,23-dihydro-25-(1-methylethyl)-.
(2aE,4E,8E)-(5’S,6S,6’R,7S,11R,13R,15S,17aR,20R,20aR,20bS)-3’,4’,5’,6,6’,7,10,11,14,15,17a,20,20a,20b-Tetradecahydro-20,20b-dihydroxy-6’-isopropyl-5’,6,8,19-tetramethyl-17-oxospiro [11,15-methano-2H,13H,17H-furo[4,3,2-pq][2,6]benzodioxacyclooctadecin-13,2’-[2H]pyran]-7-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabino-hexopyranoside CAS RN®: 70209-81-3; UNII: 0W28CYI3TU.

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide, monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide, monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide, monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide, monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In USP Doxycycline Related Compound A RS: Change
444.43
to:
444.44
AND
Change
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide, monohydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.13
to:
(4S,4aR,5S,5aR,6S,12aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide hydrochloride.
C₂₂H₂₄N₂O₈ · HCl 480.90

In Analysis: Change
M_W(Salt) = molecular weight of ammonium glycyrrhizate, 840.08 g/mol
M_W(Acid) = molecular weight of glycyrrhizic acid, 821.59 g/mol
to:
M_W(Salt) = molecular weight of ammonium glycyrrhizate, 839.97 g/mol
M_W(Acid) = molecular weight of glycyrrhizic acid, 822.94 g/mol

In USP Melengestrol Acetate Related Compound A RS: Change
16-Methylene-17α-hydroxy-4-pregnene-3,20-dione 17-acetate.
to:
16-Methylene-3,20-dioxopregn-4-en-17-yl acetate.
AND
In USP Melengestrol Acetate Related Compound B RS: Change
17α-Hydroxy-6,16-dimethyleneprogna-4-ene-3,20-dione 17-acetate.
to:
6,16-Dimethylene-3,20-dioxopregn-4-en-17-yl acetate.

In USP Tryptophan Related Compound A RS: Change
3,3′-[Ethylidenebis(1H-indole-1,3-diyl)]bis[2S)-2-aminopropanoic]acid.
C₂₄H₂₆N₄O₄ 432.49
to:
(2S,2'S)-3,3'-[Ethane-1,1-diylbis(1H-indole-1,3-diyl)]bis(2-aminopropanoic acid).
C₂₄H₂₆N₄O₄ 434.50

Change
Standard solution: Transfer 2.0 mg/mL of USP Latanoprost RS into a suitable volumetric flask, dissolve in dehydrated alcohol equivalent to 20% of the final volume, and dilute with chromatographic hexane to volume.
Sample solution: Transfer 2.0 mg/mL of Latanoprost into a suitable volumetric flask, dissolve in dehydrated alcohol equivalent to 20% of the final volume, and dilute with chromatographic hexane to volume.
to:
Standard solution: 2.0 mg/mL of USP Latanoprost RS prepared as follows. Transfer USP Latanoprost RS into a suitable volumetric flask, dissolve in dehydrated alcohol equivalent to 20% of the final volume, and dilute with chromatographic hexane to volume.
Sample solution: 2.0 mg/mL of Latanoprost prepared as follows. Transfer Latanoprost into a suitable volumetric flask, dissolve in dehydrated alcohol equivalent to 20% of the final volume, and dilute with chromatographic hexane to volume.

In Liquid Chromatography: Isocratic Elution/Injection volume: Change
L₂ = internal diameter of the column used (mm)
dc₁ = particle size indicated in the monograph (µm)
dc₂ = particle size of the column used (µm)
to:
L₂ = new column length (mm)
dc₁ = column internal diameter indicated in the monograph (mm)
dc₂ = new column internal diameter (mm)